Manual Pallet Truck
General Introduction of product :
Manual Pallet Truck , also known as hand pallet jack , hand hydraulic truck , pallet pump , which is manual and hydraulic operated material handling tools , used to lift and move pallet in horizontal direction, pallet loading and unloading .
General Introduction :
Manual Pallet Truck which is manual and hydraulic operated material handling tools , used to lift and move pallet in horizontal direction, pallet loading and unloading . Manual pallet truck is the most basic of forklift , can used for both heavy and light pallet within factory workshop and warehouse .Our Allman Industry Company can provide manual pallet truck with capacity 2ton , 2.5ton , 3ton and 5ton . It is also known as hand pallet jack , hand hydraulic truck , pallet pump ,
It is very widely used in logistic transportation, plant workshop ,warehouse, port , station etc. for cargoes moving and storage .
Manual pallet truck is controlled by a lever that also acts as the hydraulic cylinder pump handle to control the pallet truck fork up and down . A small handle on the tiller releases the hydraulic fluid, causing the forks to lower. The front wheels inside the end of the forks are mounted on levers linked with levers attached to hydraulic cylinder. When raise the lever on the tiller to the upper position , the forks lower down . While wrench the lever to the lower position , the oil sealed closed , then press the handle to make the hydraulic raise ,thee forks raise up . When the lever is in this middle position , the forks are fixed , can’t up and down , at this time , the manual pallet truck can move or transport the goods .
Operation Precautions :
1. It can be only used to move the load within rated capacity . Pls don’t overload .
2. Check the manual pallet truck carefully on the hydraulic cylinder ,structure and wheels before use it . Make sure all the components are firmed and no damage , nothing stuck into the wheels .
3. Make sure the fork length is enough for loading the pallet .
4. When the manual pallet is working , make sure the pallet is balanced without incline . Two forks should be both under the pallet , moving with only single fork loaded is not allowed .
5. Pulling the manual pallet truck slowing and stably , too fast speed isn’t allowed . Meanwhile , pls avoid colliding any other equipment or objects .
6. Don’t keep the manual pallet truck loaded for long time .
7. The moving goods on the pallet should be packed tightly . Don’t use manual pallet truck to move unpacked or loosely packed goods .
8. Using the manual pallet truck on plane ground . If it’s necessary to move through slope area , people shouldn’t stand in the front of the fork , to avoid any accident .
9. When don’t use the manual pallet truck , pls place it at the specified area . Meanwhile , remember to lubricate the steel parts regularly , to keep its long lifespan .