Magnetic Plate Lifter

Magnetic Plate Lifter

Magnet Plate Lifter Specification Information :
Rated capacity : 100kg , 300kg , 600kg , 1000kg , 2000kg , 3000kg , 5000kg . 6000kgs .
Safety factor : 3.0:1 or 3.5:1
Operation temperature : less than 80 ℃ .
Color : Orange .

Send InquiryChat Now
Product Details

Magnet Plate Lifter Specification Information :

Rated capacity : 100kg , 300kg , 600kg , 1000kg , 2000kg , 3000kg , 5000kg .  6000kgs .

Safety factor : 3.0:1 or 3.5:1

Operation temperature : less than 80 ℃ .

Color : Orange .

 

Features :

Magnet plate lifter adopts computer simulation magnetic circuit design, the magnetic field distribution is reasonable, the depth of permeability is large.

The iron removal body is simpler than the electromagnetic iron removal . No electricity is needed to operate the magnet plate lifter , once operated , there is less than 1% residual magnetism .

No cooling system required . Magnet plate lifter is energy saving and lower fault rate.

Easy operation, the simple switch and safety button design allows for one hand operation .

It’s a safe and reliable lifting tool , light weight and portable .

It is manufactured strictly according to standard JB/T8711-1998 , and all the magnet plate lifters have passed CE certificate.

 

How to determine the right type of magnet plate lifter for your application ?

The capacity of lifting magnet determined by the thickness and surface quality of the steel plate.

Before operation, it’s necessary to find out the percentage or the steel thickness or the component and capacity curve.

If the components surface roughness is less than 6.3μm , the magnet plate lifter surface gap will not exist , the lifter gap should be estimated .

 

Operation Attentions :

Before lifting the steel plate, clean its surface and make the center line of permanent magnet lifter coincide with the center line of steel plate. Then, put the magnet plate lifter on the working plane, rotate the handle position from "-" to "+", and check whether the safety ramp is locked automatically or not .

The lifting steel plate weight should not exceed the rated capacity of magnet plate lifter . Meanwhile its temperature should not exceed 80 degrees.

When the magnet lifter is lifting steel plate , no one is allowed to work or stay under the lifting plate , to avoid personal injury because of collision and vibration.

After the steel plate is lifted, press the handle button inwards to separate the security key from the security pin.Then, the handle position is pushed back from "+" to "-" and the magnet lifter is closed. At this time, the steel plate will be separated from the magnet lifter automatically.

Hot Tags: magnetic plate lifter, China, suppliers, manufacturers, cheap, price
Inquiry