Motorized Beam Trolley

Motorized Beam Trolley

ALLMAN top quality motorized beam trolley is commonly connected with electric chain hoist , act as as traveling mechanism along the I beam of crane . But sometimes , customers may use this motorized beam trolley separately .

Send InquiryChat Now
Product Details

Motorized Beam Trolley

motorized beam trolley for sale


Technical Parameters :

1


Usage :  

ALLMAN top quality motorized beam trolley is commonly connected with electric chain hoist , act as as traveling mechanism along the I beam of crane . But sometimes , customers may use this motorized beam trolley separately .

How to install the motorized beam trolley ?

1. Install the beam trolley

1)Insert the suspension pins into the lateral plate G and lock it with suspension pin bolts and nuts.

2)Install the suspension pin with adjusting disk.

3)Install the suspension pin into the hanger T. The nameplates of hoist and trolley should be in the same direction.

4)Install more gaskets into the suspension pin before insert it into the lateral plate S.

5)Install the outside adjusting disk and spacer pin into the suspension pin, and insert the cotter pin into the spacer pin. When install the spacer pin, check if the cotter pin can be seen at the left side from the front of the trolley switch box.

china motorized beam trolley

2 .Adjust width of the beam trolley

Please adjust width of the trolley according to below drawing to get appropriate clearance.

Size A is the dimension when two side plates stretch outside completely.

Size A must be approximate B (the width of rail flange) +4mm.

Please adjust size A by increasing or decreasing adjusting disk. Insert the cotter pin into the spacer pin and bend two branches of cotter pin if the size A is ok.

motorized beam trolley factory

The nut must be fixed and strong, insert cotter pin and bend it completely.

3. Install trolley into the beam.

1)Install the trolley at the end side of the beam and then slip the trolley which has been connected with hoist already to the appropriate place. This is the most convenient method.

2)If first method is unavailable, please follow drawing 5-9.

a) Unload the brake stopper from hole A on the suspension pin, and insert it into hole B. Insert cotter pin again and bend it completely.

b) Pull the side plate S and G outside then lift the trolley until the orbit wheel and orbit surface is in the same horizontal. Put the orbit wheel of side plate G onto the surface of the orbit.

c) Hold the side plate G and stop it from dropping from the orbit. Push side plate S harder and put its orbit wheel onto the surface of the girder.

d) Unload the brake stopper from hole B and insert into hole A. Do not forget to bend the cotter pin.

buy motorized beam trolley


Hot Tags: motorized beam trolley, China, suppliers, manufacturers, cheap, price
Inquiry